After selecting the ideal location,
the pool is laid out. |
The
pool is excavated to the
dimensions provided on the
drawing. |
FOXGUARD® components are
placed in position around the
pool. |
 |
 |
 |
|
|
The brace below, installed every 4', coupled
with the vertical Z-bar* stiffeners - welded
every 2' - gives your X-brace™ pool outstanding strength. This concept has
been imitated but not duplicated. All of our claims are backed - in
writing - in a detailed Engineering report. *U.S.
Patent No. 4,797,957 Panels and
Braces are assembled and the pool walls are plumbed and leveled. Several
tons of concrete are poured around the Braces and Panels, to serve as a
permanent footer. Note the bulwark of braces. |
 |
 |
 |
|
Here the walls have been
backfilled and the decking
partially poured, visual proof that
the pool can be backfilled and
the deck poured with no need to
equalize backfill with internal
water pressure. |
The
Fox recommended
construction method applies to
rectangular and free form pools.
Here a sand, vermiculite or
sand/cement bottom is shaped
and
smoothed to the dimensions
provided on the "dig" drawing. |
The
liner is installed and the pool is ready to be filled. In this case, the
pool could be completely filled before backfilling or pouring the deck,
further evidence of the Fox statement that the pool is self-supporting. |
 |
 |
 |
|
- A variety of panel lengths allow for
endless customizing capabilities. "Z" stiffeners span the total height
of each panel for unsurpassed rigidity, strength and support.
- All panels are drilled for precision
alignment, precision brace assembly and location of rerods for footer
and deck supports.
- Curved transition improves water
circulation.
- Specially plated bolts and fasteners
assure a corrosion-free underground structure for lasting performance
and beauty.
- The entire pool structure,
braces, panels and straight wall stiffeners are encapsulated in
protective material for lasting corrosion protection.
|
